Product Description
Overview
\n
\n
\nThe Shure SM86 Cardioid Condenser Vocal Mic gives you all the advantages of Shure's SM line with condenser mic clarity. It's ruggedly built to handle touring, with a frequency response tailored for clear reproduction of vocals. The cardioid polar pattern minimizes background noise and feedback. The SM86 has a built-in 3-point shockmount for minimizing handling noise and a 2-stage filter for reducing breath noises and pops. \n \nIt requires phantom power.
\n \n
\n
\nFeatures
\n-
\n
- Condenser capsule provides studio-quality sound \n
- Rugged design handles the abuses of touring \n
- Tailored frequency response for clear reproduction of vocals \n
- Cardioid polar pattern minimizes unwanted background noise \n
- Works excellently with both stage monitors and in-ear personal monitors \n
- Built-in 3-point shockmount minimizes handling noise \n
- 2-stage filter reduces wind and breath pop noise \n
Specifications
\n
\n
\n-
\n
- Transducer type: Condenser (electret bias) \n
- Frequency response: 50 to 18,000Hz \n
- Polar Pattern: Cardioid \n
- Output Impedance: 150Î at 1kHz (Recommended minimum load impedance: 600Î) \n
- Sensitivity (at 1,000Hz): Open Circuit Voltage: -50dBV/Pa (3.15 mV) (1 Pa = 94dB SPL) \n
- Output Clipping Level: 1000Î Load at 1,000Hz: +3dBV (1.41 V) \n
- Maximum SPL (at 1,000Hz): 1000Î load (1% THD): 147dB \n
- Self-Noise: 23dB typical, A-weighted \n
- Dynamic Range (1000Î): 124dB (maximum SPL to A-weighted noise level \n
- Signal-to-Noise Ratio: 71dB at 94dB SPL (IEC 651)* \n
- *S/N ratio is difference between 94dB SPL and equivalent SPL of self-noise A-weighted \n
- Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of the output connector. \n
- Power (Phantom Supply Requirement): 11 to 52 VDC, positive at both pins 2 and 3 \n
- Current Drain: 5.2 mA \n
- Connector: Three-pin (XLR) professional audio \n
- Dimensions (H x W): 183mm x 49mm, 7.2" x 1.92" \n
- Net Weight: 278g (9.8oz.) \n
- Environmental Conditions;Operating: -18 to 60 C (0 to 135 F) (relative humidity >90%), Storage: -29 to 74 C (-20 to 165 F) (relative humidity >80%) \n
Pro Coverage
\n
\n
\nManufacturer's Warranty
\nOne year warranty on wireless mics, mixers, and circuitry products.
\n2 year warranty on wired mics.
\nWarranty terms vary. Check with manufacturer for specific product warranty.
\n
