Product Description
Overview
\n
\n
\nThe Shure Axient Digital ADX2/B87A wireless handheld microphone, like all ADX transmitters, sets the stage for exceptional performance, with wide tuning up to 184MHz, interference protection, advanced rechargeability, streamlined design, and ShowLink remote control for real-time parameter adjustments right from the booth. This one comes with Shure's reliable BETA 87A capsule.
\n \nConsumer Alert:
\nMost users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. \n
\n
\nFeatures
\n-
\n
- Durable, moisture-resistant, lightweight metal case in black finish \n
- Up to 9 hours of runtime with SB920 rechargeable battery \n
- External contacts for docked charging with optional fully covered radome \n
- Diversity ShowLink enabled for remote transmitter control and automatic interference avoidance \n
- Two transmission modes: Standard for optimal coverage and new High Density for maximum system channel count and robust coverage \n
- Encryption-enabled, secure transmission \n
Specifications
\n
\n
\nRF Carrier Range:
\n
\n-
\n
- 470–960 MHz \n
- Note: Varies by region (See Frequency Range and Ouput Power table) \n
-
\n
- 100 m (330 ft) \n
- Note: Actual range depends on RF signal absorption, reflection and interference. \n
-
\n
- 25 kHz, varies by region \n
-
\n
- >70 dB, typical \n
-
\n
- −98 dBm at 10-5 BER \n
-
\n
- Standard mode: 2.0 ms \n
- High Density mode: 2.9 ms \n
-
\n
- AD1: 20 Hz – 20 kHz (±1 dB) \n
- AD2: 20 Hz – 20 kHz (±1 dB) \n
- ADX1: 20 Hz – 20 kHz (±1 dB) \n
- ADX1M: 20 Hz – 20 kHz (±1 dB) \n
- ADX2/ADX2FD: 20 Hz – 20 kHz (±1 dB) \n
- Note: Dependent on microphone type \n
-
\n
- A-weighted, typical, System Gain @ +10: \n
- XLR Analog Output: 120 dB (A-weighted); 117 (unweighted) \n
- Dante Digital Output: 130 dB (A-weighted); 126 (unweighted) \n
-
\n
- Positive pressure on microphone diaphragm produces positive voltage on pin 2 (with respect to pin 3 of XLR output) and the tip of the 6.35 mm (1/4-inch) output. \n
-
\n
- −18 °C (0 °F) to 50 °C (122 °F) \n
- Note: Battery characteristics may limit this range. \n
-
\n
- −29 °C (−20 °F) to 65 °C (149 °F) \n
- Note: Battery characteristics may limit this range \n
Pro Coverage
\n
\n
\nManufacturer's Warranty
\nOne year warranty on wireless mics, mixers, and circuitry products.
\n2 year warranty on wired mics.
\nWarranty terms vary. Check with manufacturer for specific product warranty.
\nsearch terms: shure axient digital, shure axient wireless, shure axient wireless microphone system, shure axient wireless system, shure adx2fd/b87a, shure axient microphone, shure axient system, shure axient digital wireless microphone, mic wireless shure axient digital, axient digital shure
\n
