Product Description
Overview
\n
\n
\nADX1M delivers impeccable audio quality and RF performance, and is equipped with ShowLink remote control for real-time parameter adjustments and interference avoidance. The contoured form factor and lightweight PEI construction offer both comfort and heat resistance. This transmitter features wide tuning, High Density (HD) mode, encryption, and advanced rechargeability. Sealed switches and LEMO connector protect against moisture, while the OLED display provides excellent visibility in low-light environments. Includes two SB910M rechargeable batteries.
\n \nConsumer Alert:
\nMost users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. Features \n
\n
\n-
\n
- Small and streamlined design for better concealment and wear (68mm × 60mm × 18mm) \n
- High-contrast OLED display \n
- Diversity ShowLink enabled for remote transmitter control and automatic interference avoidance \n
- Patent-pending internal adaptive antenna for optimized signal when ADX1M is worn against the body \n
- UltemPEI construction for heat resistance and durability \n
- Recessed LEMO connector \n
- Sealed buttons and LEMO connection for protection against sweat and moisture ingress \n
- Two transmission modes: Standard for optimal coverage and new High Density for maximum system channel count and robust coverage \n
- Encryption-enabled, secure transmission \n
- Up to 7 hours of runtime with SB910M rechargeable battery \n
- Detachable belt clip \n
Specifications
\nRF Carrier Range:
\n
\n-
\n
- 470–960 MHz \n
- Note: Varies by region (See Frequency Range and Ouput Power table) \n
-
\n
- 100 m (330 ft) \n
- Note: Actual range depends on RF signal absorption, reflection and interference. \n
-
\n
- 25 kHz, varies by region \n
-
\n
- \n>70 dB, typical \n
-
\n
- −98 dBm at 10-5 BER \n
-
\n
- Standard mode: 2.0 ms \n
- High Density mode: 2.9 ms \n
-
\n
- AD1: 20 Hz – 20 kHz (±1 dB) \n
- AD2: 20 Hz – 20 kHz (±1 dB) \n
- ADX1: 20 Hz – 20 kHz (±1 dB) \n
- ADX1M: 20 Hz – 20 kHz (±1 dB) \n
- ADX2/ADX2FD: 20 Hz – 20 kHz (±1 dB) \n
- Note: Dependent on microphone type \n
-
\n
- A-weighted, typical, System Gain @ +10: \n
- XLR Analog Output: 120 dB (A-weighted); 117 (unweighted) \n
- Dante Digital Output: 130 dB (A-weighted); 126 (unweighted) \n
-
\n
- Positive pressure on microphone diaphragm produces positive voltage on pin 2 (with respect to pin 3 of XLR output) and the tip of the 6.35 mm (1/4-inch) output. \n
-
\n
- −18 °C (0 °F) to 50 °C (122 °F) \n
- Note: Battery characteristics may limit this range. \n
-
\n
- −29 °C (−20 °F) to 65 °C (149 °F) \n
- Note: Battery characteristics may limit this range \n
Pro Coverage
\n
\n
\nManufacturer's Warranty
\nOne year warranty on wireless mics, mixers, and circuitry products.
\n2 year warranty on wired mics.
\nWarranty terms vary. Check with manufacturer for specific product warranty.
\n
