Product Description
Overview
\n
\n
\nADX1, like all ADX transmitters, sets the stage for exceptional performance, with wide tuning up to 184 MHz, interference protection, advanced rechargeability, streamlined design, and ShowLink remote control for real-time parameter adjustments right from the booth. Includes two SB910 rechargeable batteries.
\n \nConsumer Alert:
\nMost users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. \n
\n
\nFeatures
\n-
\n
- Removable antenna and fully concealed buttons and switch \n
- Two connector options: TA4 and LEMO3 \n
- Advanced control menu with powerful features \n
- Durable, moisture-resistant, lightweight metal case \n
- Up to 10 hours of runtime with SB910 rechargeable battery \n
- Diversity ShowLink enabled for remote transmitter control and automatic interference avoidance \n
- External contacts for docked charging \n
- Two transmission modes: Standard for optimal coverage and new High Density for maximum system channel count and robust coverage \n
- Encryption-enabled, secure transmission \n
Specifications
\n
\n
\nRF Carrier Range
\n
\n-
\n
- 470–960 MHz \n
-
\n
- 100 m (330 ft) \n
- Note: Actual range depends on RF signal absorption, reflection and interference. \n
-
\n
- >70 dB, typical \n
-
\n
- −98 dBm at 10-5 BER \n
-
\n
- Standard mode: 2.0 ms \n
- High Density mode: 2.9 ms \n
-
\n
- AD1: 20 Hz – 20 kHz (±1 dB) \n
- AD2: 20 Hz – 20 kHz (±1 dB) \n
- ADX1: 20 Hz – 20 kHz (±1 dB) \n
- ADX1M: 20 Hz – 20 kHz (±1 dB) \n
- ADX2/ADX2FD: 20 Hz – 20 kHz (±1 dB) \n
- Note: Dependent on microphone type \n
-
\n
- A-weighted, typical, System Gain @ +10 \n
- XLR Analog Output: 120 dB (A-weighted); 117 (unweighted) \n
- Dante Digital Output: 130 dB (A-weighted); 126 (unweighted) \n
-
\n
- −6 dBFS input, 1 kHz, System Gain @ +10 \n
-
\n
- Positive pressure on microphone diaphragm produces positive voltage on pin 2 (with respect to pin 3 of XLR output) and the tip of the 6.35 mm (1/4-inch) output. \n
-
\n
- −18 °C (0 °F) to 50 °C (122 °F) \n
- Note: Battery characteristics may limit this range. \n
-
\n
- −29 °C (−20 °F) to 65 °C (149 °F) \n
- Note: Battery characteristics may limit this range. \n
Pro Coverage
\n
\n
\nManufacturer's Warranty
\nOne year warranty on wireless mics, mixers, and circuitry products.
\n2 year warranty on wired mics.
\nWarranty terms vary. Check with manufacturer for specific product warranty.
\n
\nsearch terms: shure adx1, shure axient adx, adx1, shure ad1 vs adx1, axient adx1, axient digital adx, shure axient g57, shure adx 1, adx1 shure, shure adx
\n
