Product Description
\n
\n
\n50w, 5-inch / tweeterThe WM5T/70 features built in 70-volt taps at 5, 10 or 20 watts as well as optional 8-ohm (25 watt) operation mean the WM5T/70's can be driven by virtually any amplification or paging system including the Coliseum CA1 or CA1T.
\n
\n
\n
\n
\n
\n
\nFeatures
\n-
\n
- High Performance Two-Way In-wall Speaker \n
- 5-inch Woofer / 1-inch Mylar Dome Tweeter \n
- Selectable 70-volt or 8-ohm Operation \n
- Power Taps at 5, 10 and 20 Watts \n
- 50 watts (8-ohm mode) \n
- Open Back Design \n
- Mounting Hardware Included \n
- Paintable Metal Grille and ABS Plastic Baffle \n
- Installation Hole Size - 267mm x 182.5mm \n
Specifications
\n| System Type | \n2-way, Full Range, In-Wall Mount | \n
| Active or Passive | \nPassive | \n
| Power Rating (Watts) | \n50 | \n
| Nominal Impedance (Ohms) | \n4 | \n
| Sensitivity (dB @1Watt/1m) | \n92 | \n
| Frequency Response (Hz +/- 3dB) | \n80 -18,000 | \n
| Driver Configuration | \nTweeter, 5 inch | \n
| HF Driver(s) | \nMylar Tweeter | \n
| HF Dispersion (°H x °V) | \n90x90 | \n
| LF Driver(s) | \n5 inch | \n
| Inputs | \nSolder Lug | \n
| Other Controls / Features | \nOptional LT-70V5W five watt, 70V matching transformer is available. | \n
| Included Hardware | \nMounting Screws and Bracket | \n
| Enclosure Materials | \nInjection Molded, ABS Plastic | \n
| Grille | \nPerforated Steel | \n
| Covering / Finish | \nLow Reflective White | \n
| Other Details | \nCutting/Painting Template and Putty Sealer Strip also included. | \n
| Dimensions (DWH xbackW, inches) | \n3.5 x 7.5 x 11 | \n
| Dimensions (DWH xbackW, cm) | \n9 x 19 x 28 | \n
| Weight (lbs/kg) | \n3 / 1.4 | \n
